February 16, 2013 (2 Hrs)

Meghan and I finished up Section 16 – Top Wing Skins by spending two hours installing the Outboard Aileron Hinge Bracket Assemblies.  We first clecoed the brackets to the Trimmed Outboard Wing Rib (W-1012) and the Rear Spar Assembly and I final/match-drilled #30 the required holes.  We removed the brackets and deburred all of the holes, then clecoed them back onto the wing.  Finally we finished up by riveting them to the wing rib and the rear spar using AN470AD4 rivets.  Now Section 16 is complete!!!